有了OLUP，您就可以使用Unscrambler®模型进行在线预测了。您不仅可以得到预报，而且您还能得到其他的结果确保您得到的预报是正确的。
On-Line Predictor for The Unscrambler® (OLUP)是一个中间的应用程序，它可以使Unscrambler®创建的模型与外部的工具链接。OLUP的预测
功能支持一个远程的用户输入相关的参数然后得到一个最佳的预测值。
举例来说，OLUP在在线样本预测方面尤其有用。测量工具可以自动的反馈给OLUP，然后OLUP使用Unscrambler®的模型输出预测值。
The On-Line Predictor会打包（package）DLL（仅32位）中的模型，通过这个协议任何软件都可以连接OLUP，不管是定制的还是部分已经存在
的仪表。
定制软件：任何语言（C,C++,Fortran，Visual Basic等等）编写的应用程序都可以连接On-Line Predictor创建的DLL。使用这个功能就可以吧
数据输入到OLUP并且显示出分出的类别。
预先包装或者私人的软件：对于这一类型的软件，用户需要激活一个小小的可执行文件来使用DDE。然后，用户制定模型，输入需要的参数，很
快结果就出来了。这个结果和您使用的仪器有很大的相关度。
由于对于原始数据的转换信息存储在The Unscrambler®模型上，对于OLUP的新数据的相应转换会自动的执行。
您可以在多个层次的细节上定制得到的结果。除了预测值，您还可以看到：scores, leverages, deviations和variances（不确定）。然后根
据您的喜好把这些结果放在您自己的软件上，例如：屏幕、文件、纸张上，通过表格的形式或者图表的形式。
您可以通过哪些方式来使用:
通过分光光度计或者其他的一起来进行质量控制
过程监督
在线预算复杂的、耗时的或者测试代价昂贵的参数
基于多次测量或者传感器控制原始材料
通过一个或者多个工具来预测
更多关于Unscrambler® On-Line Predictor的说明：
做基于原始数据的预测
在Windows 95, 98, NT, 2000 和XP运行
可以调用32位的DLL
DDE通信（16和32位）
自动处理新数据
能同时使用多套模型工作
随软件有说明文档和示例代码
可以与OLUC共同使用
OLUP
You can now execute predictions ON-LINE using sophisticated Unscrambler® models. Not only do you get the predictions, but you
also get additional results ensuring that the predictions are correct.
The On-Line Predictor for The Unscrambler® (OLUP) is an intermediary application that allows a model created in The
Unscrambler® to be interfaced with external instrument(s). An OLUP feature called “Predict” allows a remote user to input
relevant variables and obtain an optimal predicted value.
Example: OLUP is especially useful to run on-line predictions of samples. The instrument measurements can be automatically
fed into OLUP. OLUP outputs prediction results using a predictive model initially built in The Unscrambler®
The On-Line Predictor will “package” the model in a DLL (32 bit only) or Dynamic Data Exchange (DDE, 16 and 32 bit)
protocol. Via these protocols any software can interface with OLUP whether custom built or part of existing instrumentation.
Custom Software:Custom applications written in any language (C, C++, Fortran, Visual Basic, etc) will access the DLL the On-
Line Predictor creates. Using function calls, data is fed into the OLUP and a predicted value is displayed.
Prepackaged or Proprietary Software: For this type of software, a user has to activate a small executable file that will use
DDE. From there, the user just specifies the model and enters the variables required. Results will be returned promptly.
Results may be similar to the screenshot under. Results largely depend on the instrument that you are using.
Since information about transformations on the raw data is stored within The Unscrambler® model, the same transformations
will automatically be applied to the new data in OLUP.
The results can be customized with several levels of detail. In addition to the predicted value, it is possible to view:
scores, leverages, deviations, and variances (uncertainties). Then present the results with your own software as you wish -
on screen, file, on paper, tabulated or via graphs.
What Are Some Ways I Can Use It?
Quality control by spectrophotometers or other multi-channel instruments
Process surveillance
On-Line estimation of parameters that are difficult, time consuming, or expensive to measure
Raw materials control based on multiple measurements or sensors
Predict from an instrument or instrument(s)
More about The Unscrambler® On-Line Predictor:
Make predictions from raw data
Runs under Windows 95, 98, NT, 2000 and XP
DLL function calls (32 bit only)
DDE communication (16 and 32 bit)
Automatic preprocessing of new data
Works with several models simultaneously
Documentation and code examples follow the software
Can be used together with OLUC – The Unscrambler® ON-LINE Classifier
